The open gear spray lubrication system has been widely applied to the lubrication and cooling of large open gear pairs in power plants, mines, cement and other equipment. For example: ball mill, rotary kiln, dryer, etc. By using this system, the service life of large and heavy-duty open gear pairs can be increased, the downtime can be reduced and the maintenance cost can be reduced. The lubricating width of gears is 50 - 1 100 mm. The periodic spray provides a durable oil film for the gears. The control system can provide various lubrication cycles, and has the function of fault monitoring and the "back blow" function of the nozzle.

The lubricant is sprayed to the lubricating part timely, quantitatively and evenly, so that the gear can get good lubrication, thus prolonging the service life of the gear and reducing the consumption of lubricant.

Spray lubrication can ensure that the gear gets F net fresh lubricant every time. Avoid the use of old oil circulating lubrication with impurities like debris under oil pool lubrication mode.

It can effectively solve the problem of lubricating oil leakage, and is conducive to on-site hygiene standards.

The programmable controller can monitor the oil and gas pipelines. When the pipeline is blocked, the oil drum is low liquid level or the air pressure is too low, the programmable controller will give an alarm signal of failure, and the alarm signal of the programmable controller can also be transmitted to the main control system of customers.

The back-blowing function of the nozzle can effectively prevent the blockage of the nozzle.

When the ambient temperature is too low, the heating device can be used to heat the oil column to ensure the safe and stable operation of the system.